Gamma 5002 Kullanıcı El Kitabı - Sayfa 4

Tel Çekme Makineleri Gamma 5002 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma 5002 18 sayfaları.

ASSEMBLY INSTRUCTIONS

Base Leg Assembly

The GAMMA 5002 stringing machine uses a

four leg base design. The legs must be

assembled to the support post before use.

Remove the lower column support from the

carton. This is the larger of the two posts and

has the GAMMA label.

Note: For illustration purposes, the support

column has been painted white for these

instructions.

Align the holes in the leg flange with the

matching holes in the lower column support

post. Secure the leg with one FLAT HEAD

cap screw through the upper hole, and one

SOCKET HEAD cap screw through the bot-

tom hole. Repeat this procedure for the three

remaining legs.

Upper Column Support Assembly

Insert the upper column support into the

lower column support / base leg assembly.

Leave the upper column extended to maxi-

mum height and lock in place with the two set

screws located at the top of the lower column

support.