Gamma 5003 Kullanıcı El Kitabı - Sayfa 9

Tel Çekme Makineleri Gamma 5003 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma 5003 20 sayfaları. 6 point mounting
Ayrıca Gamma 5003 için: Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (19 sayfalar), Kullanıcı El Kitabı (20 sayfalar)

Sayfayı Yazdır

1. Machine Parts

where the racquet frame will not move in the mounting system when the handle is grasped

and attempts are made to move it. Should any supports lose contact with the frame while

stringing, they should be re-tightened.

MOUNTING THE FRAME

Adjusting the Frame Shoulder Sup-

ports

Being sure the shoulder supports are free to

swivel in their mountings, simultaneously

rotate the shoulder support adjustment knobs

clockwise until both shoulder supports gen-

tly and squarely contact the frame.

Securing the Frame

Lock the shoulder supports in position by

turning the knob at the base clockwise.

Repeat the adjustment procedure for the

remaining support post.

Re-tighten all of the frame supports in the

same order as before.

Do not overtighten any of the supports as

racquet damage may occur.

The supports should be tightened to the point