Gamma 6004 Kullanıcı El Kitabı - Sayfa 10

Tel Çekme Makineleri Gamma 6004 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma 6004 20 sayfaları. 6 point mounting
Ayrıca Gamma 6004 için: Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (20 sayfalar), Kullanıcı El Kitabı (19 sayfalar)

Sayfayı Yazdır

MOUNTING THE FRAME

Support Slide Adjustment

Once the frame support posts are secured, lightly tighten

the support slides by turning the knobs on the outside of

the slides clockwise. Adjust the slides in equal incre-

ments until slight resistance is felt.

Apply a final adjustment to all racquet support points

until the racquet is firmly secured in the mounting

system.

Should the frame supports lose contact with the frame

while stringing, they should be adjusted, as needed, to

maintain contact with the frame.

Securing the Shoulder Supports

Secure the racquet frame with the shoulder supports by

rotating the large adjustment knobs on the outside of the

support post assemblies clockwise. Adjust the supports

until firm contact is made between the shoulder supports

and the frame.

The tear drop shaped holes torwards the back of the

shoulder supports are handy for holding the loose

end of the string while pulling the string through the

racquet. Simply insert the loose end into the tear

drop shaped holes and slide the string into the point

of the hole.