Centrometal Cm Pelet-set 90 Teknik Talimatlar - Sayfa 3

Kazan Malzemeleri Centrometal Cm Pelet-set 90 için çevrimiçi göz atın veya pdf Teknik Talimatlar indirin. Centrometal Cm Pelet-set 90 12 sayfaları.

1. Introduction

Cm Pelet-set 90, pellet based heating system (nominal burner output 60 to 90 kW) designed for

installation in combined boilers or biomass firing boilers EKO-CK P, with thermal output from 70 to

110 kW. These technical instructions present commissioning, as well as fine tuning of the burner

operating parameters. Installation, commissioning and fine tuning of Cm Pelet-set 90 must be carried

out by the manufacturer authorized fitter/serviceman

Use and maintenance instructions for Cm Pelet-set 90 in daily work are also supplied with these

instructions.

2. Mode at delivery

1. pellet burner CPPL-90

2. lower boiler door CPDV 60/70 for burner CPPL-90 (for boiler EKO-CK P 70) and CPDV

90/110 (for boilers EKO-CK P 90 and 110) - factory mounted onto EKO-CK P boilers

3. boiler control unit CPREG - touch

4. pellet feeder CPPT-90

5. pellet tank CPSP-800

Description:

1. pellet burner CPPL-90

2. tube for connecting of pellet feeding flexible tube

3. connectors for connecting of burner with control unit

4. Backfilling sensor / temperature sensor on inlet tube that

is installed tube for connecting of pellet feeding flexible

tube (backfilling sensor is detailed in the

Technical instructions for use and maintenance)

5. burner cover

6. plastic and silicone pressure switch tube

7. feeder with electric motor CPPT-90

8. pellet feeder flexible tube

9. pellet tank CPSP-800

10. cover of opening for filling the pellet tank

11. lower lid for tank cleaning

12. opening for pellet feeder

13. openings for tank cleaning

14. lower boiler door adapted for pellet burner CPDV 60/70 for burner CPPL-90 (for boiler EKO-CK P

70) and CPDV 90/110 (for boilers EKO-CK P 90 and 110)

15. connector for pressure switch silicone pipe on the lower boiler door CPDV

16. boiler control unit CPREG - touch

17. micro switch for lower boiler door

Technical instructions for the commissioning and adjustment