Gamma Progression 600 Kullanıcı El Kitabı - Sayfa 11

Tel Çekme Makineleri Gamma Progression 600 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma Progression 600 15 sayfaları.

increased friction between the clamps and the string to allow for reduced clamping pressure

while securing and holding the string under tension.

in the string clamp while tensioning, adjust the gap between the clamp jaws as

per the instructions on page 11.

FIXED CLAMP OPERATION

Fixed Clamp Operation

The fixed clamps for the GAMMA 600 are of

a dual action design. The string clamp and the

clamp base operate independently of one

another.

To clamp a string, lift the clamp head and

place the string between the jaws. Depress

the clamp head lever to secure the string.

The clamping pressure applied to the string

should be adjusted to provide sufficient

pressure to secure the string when sub-

jected to the desired pulling tension. The

diamond coated gripper plates provide for

Rotate the winged lock knob clockwise to

secure the clamp base to the turntable.

Reverse the clamping procedure to unlock

the string clamp.

The winged lock knob should be tightened

enough to prevent clamp base slippage on

the turntable, when the desired tension is

placed on the string. To go from the loose

position to the clamped position and back,

generally requires about 1/2 to 3/4 quarters

of a turn. Although when stringing at ex-

tremely high tensions, additional tightness

may be required. Note: If the string slips