Gamma Progression 602 FC Kullanıcı El Kitabı - Sayfa 9
Tel Çekme Makineleri Gamma Progression 602 FC için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma Progression 602 FC 16 sayfaları.
Ayrıca Gamma Progression 602 FC için: Kullanıcı El Kitabı (16 sayfalar)
Sayfayı Yazdır
STRINGING THE FRAME
WARNING:
FROM GRIPPER JAWS WHILE TENSIONING STRING.
TO AVOID INJURY, KEEP FINGERS AWAY
Pulling Tension
While securely holding the string gripper drum
with your hand, lift the tension bar above
horizontal and gently lower the bar under its
own weight. If the tension bar drops below
horizontal, repeat the above action until the
bar comes to rest parallel to the racquet.
When the correct tension is attained, the drop
weight bar will rest horizontally as shown. For
accurate tensioning, it must be lowered and
come to rest at horizontal without assistance.
Manually forcing the tension bar to the hori-
zontal position will greatly increase the string
tension and may result in racquet damage.
If the tension bar comes to rest above hori-
zontal, release the string by lifting the bar
and re-pull the string.
Clamping the First Main String
Secure the tensioned main string using the
second fixed clamp. Repeat the procedure
for all of the remaining main strings and tie off
at the appropriate hole following the racquet
manufacturers specification.
Follow the racquet manufacturer's recom-
mended stringing pattern for one or two piece
stringing. This will determine the starting
point for the cross strings. If applicable, tie
the first cross string using an appropriate
starting knot.
9