Gamma Progression ES II Kullanıcı El Kitabı - Sayfa 5

Tel Çekme Makineleri Gamma Progression ES II için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma Progression ES II 16 sayfaları.

MOUNTING THE FRAME

Adjusting the Frame Support Posts

Place the racquet frame over the center posts and onto the frame

support. Loosen the lever lock bolt on one support post. Slide the

post outward until the center support of the racquet support slide

is positioned near the inside surface of the racquet frame.

Securely tighten the lever lock bolt.

Adjust the opposite post using the same procedure.

Caution: To avoid racquet damage, the center posts should not

contact the racquet prior to fixing the support posts.

Tightening the Center Supports

Tighten the Center Supports by turning the adjustment knob

clockwise until slight resistance is felt.

Caution: Overtightening the Center Supports may cause racquet

damage.

Frame Shoulder Support Adjustment

Being sure the shoulder supports are free to swivel in their

mountings, simultaneously rotate the shoulder support adjust-

ment knobs clockwise until both shoulder supports gently and

squarely contact the frame.