Gamma X-2 Kullanıcı El Kitabı - Sayfa 12

Tel Çekme Makineleri Gamma X-2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma X-2 16 sayfaları.
Ayrıca Gamma X-2 için: Kullanıcı El Kitabı (11 sayfalar)

Sayfayı Yazdır

1. Table of Contents
2. Warranty
3. Features
4. Assembly Instructions
5. Mounting the Frame
6. Stringing the Frame
7. Pathfinder Awl
8. Maintenance & Adjustment
9. Troubleshooting Tips
10. Notes
11. Parts List
12. Parts Drawing

TROUBLESHOOTING TIPS

PROBLEM

String slips in clamps

String slips in gripper

With time and use, the clamping surfaces of your machine may become oily or dirty and result

in string or clamp slippage while stringing. Periodic cleaning of the String Clamps and String

Gripper is recommended. Knife sharpening stones work well for cleaning the diamond coated

string clamping surfaces. Cleaning with a solvent such as isopropyl alcohol and a mild abrasive

tool such as a toothbrush also works well to remove oily or greasy build up.

CARE & CLEANING

SOLUTION

- Adjust gap between clamp jaws

- Clean clamp jaws

- Clean gripper jaws

- Make sure string is wrapped over top gripper

prior to inserting between gripper jaws