Gamma X-6FC Kullanıcı El Kitabı - Sayfa 16

Tel Çekme Makineleri Gamma X-6FC için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma X-6FC 20 sayfaları.
Ayrıca Gamma X-6FC için: Kullanıcı El Kitabı (20 sayfalar)

Sayfayı Yazdır

TROUBLESHOOTING TIPS

PROBLEM

String slips in clamps

String slips in gripper

String clamp base slips on turntable

With time and use, the clamping surfaces of your machine may become oily or dirty and result

in string or clamp slippage while stringing. Periodic cleaning of the String Clamps and String

Gripper is recommended. Knife sharpening stones work well for cleaning the diamond coated

string clamping surfaces. Cleaning with a solvent such as isopropyl alcohol and a mild abrasive

tool such as a toothbrush also works well to remove oily or greasy build up.

CARE & CLEANING

SOLUTION

- Adjust gap between clamp jaws

- Clean clamp jaws

- Clean gripper jaws

- Make sure string is wrapped over top gripper

prior to inserting between gripper jaws

- Clean bottom of clamp & top of turntable with

alcohol

- Adjust clamp base locking nut