Gamma X-6FC Kullanıcı El Kitabı - Sayfa 9

Tel Çekme Makineleri Gamma X-6FC için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma X-6FC 20 sayfaları.
Ayrıca Gamma X-6FC için: Kullanıcı El Kitabı (20 sayfalar)

Gamma X-6FC Kullanıcı El Kitabı

STRINGING THE FRAME

Badminton Shoulder Support Protec-
tion Pad Installation
Slide the badminton shoulder support cover
over the shoulder supports. There is no need
to remove the tennis shoulder supports.
Note: An optional badminton frame support
for the head of the racquet is available.
Setting Tension
To set the stringing tension, loosen the
locking knob on the side of the drop weight.
Slide the weight in the appropriate direction
until the face closest to the string gripper
is indexed with the desired tension mark on
the tension bar.
The drop weight is of a two piece design.
When assembled, it will accommodate ten-
sions from 20 to 90 lbs For tensions from 8
to 20 lbs, remove the 5mm bolt on the face of
the drop weight, and use the smaller portion
of the weight as described above.
Note: Tensions above 77lbs require the
removal of the drop weight bar end cap.
9