Gamma Borealis R Kullanıcı Kılavuzu - Sayfa 7

Aydınlatma Ekipmanları Gamma Borealis R için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gamma Borealis R 20 sayfaları. Led moving wash/beam

Sayfayı Yazdır
Gamma Borealis R Kullanıcı Kılavuzu
LED off to on
LED on
LED on to off
Pan/Tilt Speed
Reset
All Reset
Pan Reset
Tilt Reset
Zoom Reset
Default
ESC
ESC

DMX Setup

Address Setting

If you use a DMX controller to control the units, you have to set DMX address from
1 to 512 so that the units can receive DMX signal.
Rotate MENU knob or press MENU to enter menu mode, select DMX Func-
•
tions
Press knob to confirm
•
Press knob to select DMX Address
•
Press knob to confirm, the current address will blink on the display
•
Use the Up/Down keys to adjust the address from 0 to 512
•
Press the knob to store.
•

DMX Basics

DMX512 stands for digital multiplex 512. This means that 512 channels are controlled
digitally through 1 data cable.
A channel is a set of 255 steps that are assigned to control attributes in each light. This
may be a color like red, green or blue, and intensity, strobe, pan/tilt or other attributes.
Multiple sets of 512 "universes" may be used. Only 1 universe will travel on a DMX cable,
but through networked DMX (Art-Net or sACN E1.31), many universes can travel over a
network.
Borealis R – GAMMA LED Vision
LED Dimming is from 0~100%
LED dimming full on
LED dimming full on to dark (Macro)
Use the Up/Down keys to change the speed of Pan/Tilt
Reset all parameters of the light
Reset Pan
Reset Tilt
Reset Zoom
Set the default settings
Page 7 of 20