Decimator 12G-CROSS Kullanım Kılavuzu - Sayfa 7

Medya Dönüştürücü Decimator 12G-CROSS için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Decimator 12G-CROSS 13 sayfaları. Hdmi / sdi 4k cross converter with scaling and frame rate conversion

Sayfayı Yazdır

4. Scaling / Motion Det Level (Parameter)

The Motion Detection Level is the amount difference between frames to indicate motion.

A higher value is good for low moving video and a lower value is better for high motion video.

When the sub menu is highlighted, press the ENTER button to enter this sub-menu.

Press the < and > buttons to increase or decrease the unit in the cycle.

Default value is 32, Maximum limit is 1023.

5. Scaling / Horizontal Flip (Parameter)

This flips the image horizontally.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) No

2.) Yes

6. Scaling / Vertical Flip (Parameter)

This flips the image vertically.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) No

2.) Yes

Aspect:

(Has SUB-MENUs)

Aspect

SD IN ASPECT

4:3

When highlighted in the Main Menu, press the ENTER button to enter this sub-menu.

Press the < and > buttons to move left or right respectively through the 4 menus below and press the BACK

button to go back to the Main Menu when finished.

The current value for each Sub Menu is shown in the Parameter Window.

1. Aspect / SD IN ASPECT (Parameter)

This option sets the aspect ratio of Standard definition input signals.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) 4:3

2.) 14:9

3.) 16:9

2. Aspect / SD OUT ASPECT (Parameter)

This option sets the aspect ratio of Standard definition output signals.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) 4:3

2.) 14:9

3.) 16:9

12G-CROSS OPERATING MANUAL VERSION 1.0

E&OE

Main Menu

<==

Sub Menu

Parameter Window