Decimator DMON-4S Kullanım Kılavuzu - Sayfa 3

Medya Dönüştürücü Decimator DMON-4S için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Decimator DMON-4S 11 sayfaları. Quad (3g/hd/sd)-sdi to hdmi multi-viewer and converter

Main Menus

Upon power up the unit will start in the Main Menu pointing to Input Status.
The Main Menus are:

1. Input Status

2. Control
3. Multi-View
4. M.V. Routing
5. M.V. Colours
6. M.V. UMDs
7. M.V. Flip
8. Setup
Press the < and > buttons to move left or right through the menus.
To enter into a menu press the ENTER button.
Notes:
1. Defaults are highlighted in yellow.
2. When an option is changed, a highlighted
disappear when the options are saved after 10 seconds. Avoid powering down the unit during this
time.
3. You can always return to the Main Menu by pressing the BACK button twice.
4. As you move through the menus changing parameters, they will be instantly applied to the output
signal.
Input Status:
(Has no SUB-MENUs)
1:3GB 1080p59.94
2:3GA 1080p50
3:SD 480i59.94
4:HD 1080i59.94
Control:
(Has SUB-MENUs)
Control
HDMI Out1 Type
HDMI RGB444 2C
When highlighted in the Main Menu, press the ENTER button to enter this sub-menu.
Press the < and > buttons to move left or right respectively through the 10 menus below and press the BACK
button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.
1. Control / HDMI Out1 Type (Parameter)
This is the current HDMI output type for output 1.
When the sub menu is highlighted, press ENTER to toggle through the following types:
1.) DVI RGB444
2.) HDMI RGB444 2C
3.) HDMI YCbCr444 2C
4.) HDMI YCbCr422 2C
5.) HDMI RGB444 8C
6.) HDMI YCbCr444 8C
7.) HDMI YCbCr422 8C
2. Control / HDMI Out2 Type (Parameter)
This is the current HDMI output type for output 2.
This sub menu operates the same as Control / HDMI Out1 Type.
DMON-4S OPERATING MANUAL VERSION 2.0
Copyright © 2015-2023 Decimator Design Pty Ltd, Sydney, Australia
E&OE
S
Current format on SDI Input 1
Current format on SDI Input 2
Current format on SDI Input 3
Current format on SDI Input 4
Main Menu
<==
Sub Menu
Parameter Window
DVI-D RGB 4:4:4
HDMI RGB 4:4:4 with 2-Channels of Audio
HDMI YCbCr 4:4:4 with 2-Channels of Audio
HDMI YCbCr 4:2:2 with 2-Channels of Audio
HDMI RGB 4:4:4 with 8-Channels of Audio
HDMI YCbCr 4:4:4 with 8-Channels of Audio
HDMI YCbCr 4:2:2 with 8-Channels of Audio
will appear in the top right of the LCD screen and will
2