Gamma Orux 700 Kullanıcı Kılavuzu - Sayfa 11

DJ Ekipmanları Gamma Orux 700 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gamma Orux 700 20 sayfaları. Led moving beam/spot

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, it is recommended to use a DMX terminator. This helps in preventing

corruption of the digital control signal by electrical noise and reflections. The DMX

terminator is simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,

which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below:

ORUX 700 Hybrid – GAMMA LED Vision

Page 11 of 20