Decimator DMON-16SL Kullanım Kılavuzu - Sayfa 9

Güvenlik Sistemi Decimator DMON-16SL için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Decimator DMON-16SL 10 sayfaları. Decimator dmon-16sl 1to16 channel (3g/hd/sd)?sdi multi?viewer with hdmi output

Sayfayı Yazdır

Setup: (Has SUB‐MENUs)

Setup

LOAD DEFAULTS

When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.

Press the < and > buttons to move left or right respectively through the 6 menus below and press the BACK

button to go back to the Main Menu when finished.

The current value for each Sub Menu is shown in the Parameter Window, unless it is an action Sub Menu.

1. SETUP / LOAD DEFAULTS (Action)

When highlighted in the Menu Window, press the ENTER button to load the default settings. The device will

be reset to the Main Menu Input Status.

2. SETUP / LCD OFF TIME (Parameter)

This is the time taken for the LCD light to turn off after the last button press.

When the sub menu is highlighted, press ENTER to toggle through the following times:

4.) 5 seconds

5.) 15 seconds

6.) 30 seconds

7.) 1 minute

8.) 5 minutes

9.) 10 minutes

10.) 30 minutes

11.) Never

3. SETUP / BACK2STATUS TIME (Parameter)

This is the time before the main menu is returned to Input Status after the last button press.

When the sub menu is highlighted, press ENTER to toggle through the following times:

1.) 5 seconds

2.) 15 seconds

3.) 30 seconds

4.) 1 minute

5.) 5 minutes

4. SETUP / AUTO SAVE (Parameter)

This parameter will determine if any changes will be saved to memory when changes are made.

When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) Yes

2.) No

5. SETUP / Demo Cycle (Parameter)

The Demo cycle setting is used for cycling through multiple layouts, windows or inputs on a time delay. When

the sub menu is highlighted, press the ENTER button to enter this sub‐menu.

Press the < and > buttons to move left or right through the following cycle types:

1.) None

2.) Output Select

3.) MV Windows

4.) MV Layouts

Note: The parameter will only be updated when leaving this sub‐menu.

DMON‐16SL Hardware Manual for Firmware Version 1.1

Main Menu <==

Sub Menu

Parameter Window