Gamma Ballhopper Rollerhopper 150 Manuel - Sayfa 2

Aksesuarlar Gamma Ballhopper Rollerhopper 150 için çevrimiçi göz atın veya pdf Manuel indirin. Gamma Ballhopper Rollerhopper 150 3 sayfaları.

STANDING THE ROLLERHOPPER

Step 1: Release the Leg Clip

from the Handle/Leg.

LOCKING THE WHEEL

FEEDING AND CARTS

LIMITED ONE-YEAR WARRANTY

GAMMA SPORTS ("GAMMA") warrants to the original purchaser that the BALLHOPPER Pickup ("EQUIPMENT") purchased is

free from defects in materials and workmanship for a period of ONE (1) year from the date of original purchase. Should any

defects develop under normal use within the specified time period, GAMMA will, at its option, repair or replace the defective

EQUIPMENT provided it is returned to GAMMA prepaid at the purchaser's expense. This warranty does not apply to any

damage or defect caused by negligence, abuse, misuse, unauthorized alteration, shipping, handling, or wear and tear as a

result of normal use.

GAMMA's obligation under this warranty is limited to replacement or repair of the defective EQUIPMENT, and no one is

authorized to promise any other liability. GAMMA shall, in no event be liable for any incidental or consequential damages.

This warrranty gives you specific legal rights and you may also have other rights which vary from state-to-state.

To return defective EQUIPMENT, a return authorization (RA#) must be obtained from a GAMMA customer service

representative by calling 1-800-333-0337. The RA# must be clearly marked on the outside of the shipping carton being

returned. All returns must be shipped prepaid by the customer to GAMMA. Please retain the original shipping carton and

packing materials for any future shipments. GAMMA will not be responsible for EQUIPMENT which is not returned in the

original undamaged packaging.

Made in Taiwan

Step 2: Move the Legs outward

and snap the Leg Clip into position

between the two Handles/Legs.

NOTE: Before opening the Wheel to feed or dump balls, be sure to engage the Yoke Spring

Pins into the holes on each side of the Wheel.

IMPORTANT: When engaging the Yoke Spring Pins into the Wheel holes, be sure to align the

holes with the pins BEFORE engaging. Do not spin the Wheel until the pins clicks into

position. This will cause damage to the Wheel over time that is not covered by the warranty.

Feed tennis balls directly

from the Rollerhopper 150.

Ballhopper

Rollerhopper

Step 3: When Handles/Legs are locked

in the open position, lift the Rollerhopper

into a standing position by the Yoke.

Dump tennis balls into

a Ballhopper teaching

cart.

150

™

Updated 03.29.12