Gamma X-Stringer XLT Kullanıcı El Kitabı - Sayfa 11
Aksesuarlar Gamma X-Stringer XLT için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Gamma X-Stringer XLT 20 sayfaları. Electronic stringing machine
STRINGING THE FRAME
Applying Tension
Before applying tension, gently pull the string until all slack is removed.
To apply tension, wrap the string clockwise around the String Guide and position the string
between the two gripper jaws.
CAUTION: NEVER TENSION A STRING WITH YOUR FINGERS BETWEEN THE
STRING AND THE STRING GUIDE AS SERIOUS INJURY COULD RESULT IF
YOUR FINGER IS CAUGHT BETWEEN THE STRING AND STRING GUIDE WHEN
TENSION IS APPLIED TO THE STRING.
IN CASE OF EMERGENCY, PRESSING ANY BUTTON ON THE CONTROL PANEL
WILL RELEASE THE TENSION ON THE STRING.
To tension a string, push the tension switch
or the foot pedal. The string gripper will rotate
and slowly apply tension to the string. When
the set tension has been attained, the grip-
per will stop and the display will fl ash. As the
tensioned string stretches, the gripper may
apply tension intermittently, maintaining the
set tension.
To release the string after clamping, push the
tension switch or foot pedal. If the string grip-
per does not release the string, depress and
hold the return button to release the string.
11