IKEA RODULF Manuel - Sayfa 5

İç Mekan Mobilyaları IKEA RODULF için çevrimiçi göz atın veya pdf Manuel indirin. IKEA RODULF 25 sayfaları. An electro-mechanically height adjustable work-surface with control interface to adjust height up and down.
Ayrıca IKEA RODULF için: Manuel (25 sayfalar), Manuel (32 sayfalar), Manuel (12 sayfalar)

Sayfayı Yazdır

Trouble shooting guide

NOTE!

Do always disconnect the cable from the wall socket before maintenance!

Symptom

The desk does not

move.

Only one column is

moving.

The columns are moving at

different speeds.

The desk only moves

short distances.

The desk stops and

reverse during operation.

The desk is not able to drive

all the way up or all the way

down.

The desk can only drive in

one direction (up or down).

The desk is not horizontal.

Check

Make sure that all

cable are connected.

Unplug the desk from

the wall socket for

roughly 1 minute and

reconnect.

It is possible to move

the slower column by

pulling/pushing.

It is not possible to move

the slower column by

pulling/pushing.

Make sure that the desk is

not overloaded.

Make sure that nothing

is blocking the desk

movement.

Try

Connect the cables.

Follow installation

instructions and

perform a reset.

Perform a reset. If there's still

only one column moving,

replace the column that is

not moving.

Replace the column that is

moving slower.

Replace the column that is

moving faster.

Unload the desk. If the

problem remains,

replace the control box.

Remove the obstacle. If

the problem remains

replace the whole

underframe.

Check all connections.

Perform a reset.