IKEA RODULF-GF-470 Manuel - Sayfa 8

İç Mekan Mobilyaları IKEA RODULF-GF-470 için çevrimiçi göz atın veya pdf Manuel indirin. IKEA RODULF-GF-470 12 sayfaları.
Ayrıca IKEA RODULF-GF-470 için: Manuel (25 sayfalar)

Sayfayı Yazdır

English

An electro-mechanically height adjustable work-surface with

control interface to adjust height up and down.

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved

by a person responsible for their safety. Children shall not play

with the appliance.

Cleaning and user maintenance shall not be made by children

without supervision.

Translated from the original instructions.

Advice and instructions for RODULF.

This desk shall only be used together with the

controller included.

It is the responsibility of every person who installs,

uses, repairs or services this desk to carefully read

these instructions. Keep these instructions close to

your sit/stand desk.

Installation instructions

• The desk is assembled according to separate

assembly instructions.

• Connect the cable from one leg to the other.

• Connect the electrical cable to a wall socket.

•

NOTE! The electrical cable must have full mobility.

• The desk is now ready for use.

• The motors stop automatically when the desk

reaches its lowest or highest position.

Use of the desk

• The desk shall only be used as a work desk that

can be continuously adjusted between sitting and

standing position. The desk shall only be used

indoors and in a dry premises (office environment

or similar).

The desk must not be overloaded – the

maximum load is 80 kg/176 lb. The system may

be run continuously for maximum 1 minute. The

motors must rest for approximately 9 minutes it

can be used again.

QUICK GUIDE

Manual reset / first use:

• Perform a reset by simultaneously pressing the

up and down buttons for at least 8 seconds. Keep

holding the buttons and the desk will slowly move

to the lowest possible point. Reset is complete

when the desk has stopped at the lowest point.

Follow these instructions when adjusting desk

height:

1. Make sure no objects are in the way of the desk

height adjustment range.

2. In order to run the desk up or down, press the

man oeuvre button up or down, respectively.

Press the up button and continue to hold until

desired desktop height is reached.

Press the down button and continue to hold until

desired desktop height is reached.