IKEA SKYTTA Kurulum Kılavuzu - Sayfa 14
İç Mekan Mobilyaları IKEA SKYTTA için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. IKEA SKYTTA 16 sayfaları.
Ayrıca IKEA SKYTTA için: Kurulum Kılavuzu (16 sayfalar)
Sayfayı Yazdır- 1. Table of Contents
- 2. Sliding Doors for All Spaces with SKYTTA
- 3. Tools
- 4. Before You Start
- 5. SKYTTA Parts
- 6. To Think about
- 7. Height Options
- 8. The Doors Fit Perfectly
- 9. A Little Space Left above the System
- 10. A Lot of Space Left above the Door
- 11. The Doors Are too High
- 12. Sloped Ceiling
- 13. More Information
- 14. Services
Height options
The doors are too high – reduce door height
In case the SKYTTA doors are too high, you need to
cut the door frame and the panel. Please be aware
that this is not possible for glass or mirror panels.
Check in the planning tool regarding other panels
that cannot be cut. You can still use panels that are
not suitable for cutting if you combine them with
panels that can be cut.
This solution is suitable when the distance between
floor and ceiling is:
1500–2038 mm
It's possible to cut the door and panels to reduce the
height. This can be done using professional tools, therefore
we recommend that this is done by a professional carpen-
ter. Please note that this option is not applicable for glass
or mirror glass panels, as the glass is tempered and will
shatter into tiny pieces. Check in the planning tool regard-
ing other panels that cannot be cut.
14
1500–2390 mm
For this situation, we strongly recommend to get the
help of a professional carpenter with the appropriate
tools. In this illustration, you can see how the system
would look like in this situation.
Examples of how to cut door frame and panel
This step needs to be performed by a professional carpenter
with the appropriate tools.
NOTE! The Assembly Instruction for this step is only available
online.