Major 4000897 Manuel - Sayfa 3

Güç Kaynağı Major 4000897 için çevrimiçi göz atın veya pdf Manuel indirin. Major 4000897 10 sayfaları. Power supply unit (psu)

General

No matter if fixed installation or touring business – complex lighting systems always

require best reliability together with relatively easy operation and maintenance

features. In order to be able to solve eventually occurring problems not only fast but

also most efficiently, it is important to know which component of the system fulfils

which purpose.

This fact has been taken into consideration during the design and development of

Rainbow Colour Changers. And this is why we find the entire "intelligence" where we

first expect it to be: within the Colour Changers themselves, but not in the power

supply unit. Consequently the DMX-addressing, the selection of channels, etc... is

done right on the Colour Changer itself.

The external power supply unit (PSU) combines the DMX signal with the internal 24 V

DC of the Colour Changer. These power/control signals are available on the female

XLR4 outputs.

Different versions

In order to meet your individual demands, we offer two different PSU-versions:

the MICRO PSU with 1 output is able to run up to 6 Colour Changers

the MAXI PSU with 4 outputs can run up to 24 units

The maximum number of Colour Changers per output is restricted:

PSU

Micro

Maxi

The Micro PSU as well as the Maxi PSU are connected with the mains via powerCON

connection. The necessary operating voltage of the Colour Changers (24 V) is

guaranteed by the opto-isolated, overload-protected power supply.

The PSUs adjusts itself automatically to the operating voltage from 100 to 240 Volt.

Version: 2.0, 18.11.2011

max. no. of

units (altogether)

max. no. of 6", 8",

12" per output

max. no. of 15",

8-Lite per output