ADF LINEA NMV Kurulum Kılavuzu - Sayfa 15

Kontrolör ADF LINEA NMV için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ADF LINEA NMV 18 sayfaları. Variable speed controller

ADF LINEA NMV Kurulum Kılavuzu
Replace the cover for Fan Access.
When inserting, ensure that the thermostat cabling is fixed in position so it cannot move
and rub or get caught in the fan blades. Besides being noisy, this could damage the cables,
the blades or the fan. Use cable ties if required (not supplied).
Screw the cover back into position. Carry out the reverse of 4. to re-assemble the fire
linings and complete assembly.
Install the Fan controller
7.
The controller must be positioned away from vents or the heat source, where it won't get
too hot. A minimum of 200mm from either side of the firebox. Do not place above the
firebox.
Test and Commission the Fan and Controller
8.
To check the fan operation, use the instructions on page 3.
For Installer adjustment see the instructions from page 16.
15