IKEA UPPSPEL 394.301.98 Hızlı Başlangıç Kılavuzu - Sayfa 6

İç Mekan Mobilyaları IKEA UPPSPEL 394.301.98 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. IKEA UPPSPEL 394.301.98 40 sayfaları.

Reset process:

Step 1: Press/hold the

down button for a few seconds until the table reaches

its lowest position.

Step 2: Press/hold the

down button a second time until the display shows

"RST".

Step 3: Press/hold the

down button a third time until the table slowly lowers.

Once the table stops moving and the display shows "72", your desk is ready to

use.

Lock/Unlock controller:

Lock the controller: Press and hold the

display shows "LOC".

Unlock the controller: Press and hold the

display shows the actual height of the table.

Error Code Instructions

Error Code

Reason

E01

Overcurrent protection/short circuit

E07

Motor line open circuit error

H01

Over-heating

RST

Power failure

888/000

Controller error

The crossed-out wheeled bin symbol indicates that the item should be disposed

of separately from household waste. The item should be handed in for recycling

in accordance with local environmental regulations for waste disposal. By

separating a marked item from household waste, you will help reduce the

volume of waste sent to incinerators or land-fills and minimise any potential

negative impact on human health and the environment. For more information,

please contact your IKEA store.

symbol for 10 seconds until the

Solution

See instructions for Reset/Initialisation.

Unplug from the wall socket and re-plug – or wait 18 minutes to let the

motors cool before using them again.

See instructions for Reset/Initialisation.

Please contact IKEA Customer Service.