DECK DOLLY JD 1023E Montaj Talimatları Kılavuzu - Sayfa 7

Dış Mekan Arabası DECK DOLLY JD 1023E için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. DECK DOLLY JD 1023E 8 sayfaları. 2020 and newer with 54d (pictured) or 60d deck

Sayfayı Yazdır

10)

With the Deck Dolly preassembled, lay the unit over the deck and align the

bottom support brackets with the rod in the deck mount so that it hooks in.

Depending on how it fits you may have to move the brackets to the other side of the

Upright. The brackets have two sets of holes and the key thing to remember is that

the wheels are close or just touching the ground when in the horizontal position. You

can move the brackets up if needed if any interference is found. The various holes

give you adjustability to conform to your deck. After insuring proper fit you may now

11)

Once you are satisfied with the fit of the Dolly on your deck and squareness of the

dolly you may align and tighten the lower cross support tube when the brackets are

centered on the deck rod mount. Beginning from the bottom, tighten all bolts while

insuring alignment.

12)

Check all bolts for tightness before operating the Deck Dolly.

13)

Please take care to watch the lower deck wheels when operating the Dolly for

the first time. You may have to raise and turn the deck anti scalping wheels so they do

Using the DeckDolly is a threes step process and is easy as:

tighten those bolts.

not catch on the ground. Assembly is complete.

Using The DeckDolly