IKEA VARDE Manuel - Sayfa 4

İç Mekan Mobilyaları IKEA VARDE için çevrimiçi göz atın veya pdf Manuel indirin. IKEA VARDE 32 sayfaları.
Ayrıca IKEA VARDE için: Montaj Talimatları Kılavuzu (24 sayfalar), Manuel (24 sayfalar)

Sayfayı Yazdır

ENGLISH

The worktop is made of solid wood with

a moisture content of 7-9%, which is the

proper moisture content for worktops used

in surroundings with normal temperature

and humidity. Since the worktop is a natu-

ral product, it "breathes" and may warp

a little due to fluctuations in the humid-

ity of its surroundings. However, this can

normally be counteracted if you follow the

mounting and care instructions below.

1 Do not open the sealed plastic packaging

until you are ready to install the work-

top. Store unopened worktops at nor-

mal room temperature (approx. 20°C)

and normal humidity. Avoid placing the

worktop next to a hot radiator or laying

it down flat on a cold floor.

2 The worktop has been treated once at

the factory with wood treatment oil.

After mounting use fine sandpaper to

sand the top. Work along the grain of

the wood. Apply a thin coat of BE-

HANDLA wood treatment oil. Wait for

about 15-20 minutes to allow the oil

to penetrate the surface completely.

Wipe off any surplus oil with a cloth or

kitchen paper. During the first week of

use, treat the worktops every second

day, and then every third day until

the surface is saturated (after about 2

months). To ensure that the worktop

retains its durable surface for many

years to come, it should be treated

with BEHANDLA wood treatment oil 3-5

times a year. Surfaces next to a sink

or stove easily get dry and need to be

treated more often.

3 Scratches and minor impact marks can

be removed by sanding with sandpaper

K 180 on a sanding block. Always sand

along the grain of the wood. Never use

steel wool. For daily cleaning, use soft

soap and water, not any form of chemi-

cal.

4 Worktops that are fitted over a dish-

washer, washing machine or oven

should be protected underneath with

insulation material resistant to moisture

diffusion and/or plastic sheeting.

IMPORTANT! Wash used brushes and soak

used cloths in water, or burn them under

careful supervision, to prevent the risk of

spontaneous combustion.