Green Brook ODM203 Hızlı Başlangıç Kılavuzu

Güvenlik Sensörleri Green Brook ODM203 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Green Brook ODM203 2 sayfaları. Infra-red microwave presence detector - 1-10v dimmable

Sayfayı Yazdır
MANUAL OVERRIDE
When the 'push' terminal is connected to a 230 volt AC supply via a push switch, the following override functions
are available.
1.
Short push (less than 1 second) manual override on/off. On to Off: the lamp turns off immediately and
cannot be turned back on for 1 minute, even if movement is detected. After this period the sensor goes
back into auto sensor mode. Off to On, the lamp turns on to 100% brightness and goes into sensor mode.
2.
Long push (greater than 1 second). Dims up and down dimming level between 10% and 50% while button is
held.
TROUBLE SHOOTING
Light not coming on
•
Check that lamp is good.
•
Check there is nothing obscuring the microwave sensor.
Intermittent operation
•
Check there are no curtains that can move in the wind.
•
Check there are no heating vents nearby.
TECHNICAL INFORMATION
Rated Voltage:
IP Rating:
Detection Angle:
Ambient Light:
Transmission Power:
HF System:
Hold Time:
Stand-by Periods:
Rated Load:
Detection (Sensitivity)
Range:
Detection Distance:
Power Consumption:
Installation Height:
Detection Moving Speed: 0.6 - 1.5m/s
Stand-by Dimming Level: 10%, 20%, 30%, 50% (choice)
Dimensions:
Your GreenBrook Microwave Presence Detector
ODM203 is guaranteed for 1 year
from the date of purchase.
This is in addition to your statutory rights.
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
www.greenbrook.co.uk
230V～50Hz
IP20
360°
2 LUX, 10 LUX, 50 LUX,
2000 LUX (choice)
<0.2mW
5.8GHz CW radar, ISM band
5s, 30s, 1min, 5min, 10min,
20min, 30min (choice)
10s, 1min, 5min, 10min,
30min, +∞, 0S (choice)
Max 600W
Max 600W
10%, 50%, 75%, 100% (choice)
Wall = 5 - 15M adj
Ceiling = 1 - 8M (radius) adj
0.9W approx
Wall = 1.5 - 3.5M
Ceiling = 2 - 8M
77.7 x 45 x 25.5mm
GUARANTEE
Infra-red Microwave Presence Detector - 1-10V Dimmable
Model: ODM203
Important Safety Instructions
•
Please read these instructions carefully before installation and keep safe for future reference.
IMPORTANT
This product should be installed by a competent person and in accordance with the current IET Wiring
Regulations and Building Regulations.
If in doubt,consult a qualified electrician.
•
Always turn off the mains supply before commencing work.
With ambient light more
With ambient light less than
than daylight threshold,
daylight threshold, the
the lamp does not switch
lamp will be on 100% when
on when someone enters
someone enters the room.
the room.
'Orion Range'
INSTALLATION
People left, light dims to
Light switches off
10%/20%/30%/50%
automatically after the
(optional) stand-by level
stand-by period
after hold time.
elapsed.