Green Brook T205 Kurulum ve Kullanım Talimatı - Sayfa 2

Güvenlik Sensörleri Green Brook T205 için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatı indirin. Green Brook T205 2 sayfaları.

Sayfayı Yazdır

Note: If '+' or '

' button is held for more than 2

seconds, the selected time digit will add or

decrease quickly (about 5 steps per second), if

no key is pressed within 60 seconds the display

will return to operating mode.

PROGRAMMING THE 'ON' / 'OFF' TIMES

1. Press the 'PROG' button and hold for 2

seconds, after 2 seconds the display will show:

(example shows 7 Day setting

Note: Only ONE of the following

options can be used at one time.

2. Use the '+' or '-' button to change the day

grouping (PROG) at the top of the display. This

will step through the following programming options:

7 DAY - MON TUES WED THU FRI SAT SUN

All of them have the same programming.

5 DAY - MON TUE WED THU FRI

Are grouped as one group, and they will all have the same

programming. SAT and SUN will be programmed individually.

INDIVIDUAL DAY -

Each day will have its program set individually. MON followed

automatically in programming by each of the other days. To copy

times set for an individual day to another day (e.g. copy Sat set

times to Sun), please see PROGRAM DUPLICATION below.

3. Once the desired day grouping is selected,

press 'PROG' button to move onto

programming ON/OFF times. Display will

show PROG 1 ON, and the hour digits flashing

(24 hour clock) (Dia.7).

(Example shown is for 5 + 1 + 1 + day program)

4. Use the '+' or '-' to set the hours and the

'PROG' to change between hours and

minutes. Followed by '+' or '-' again to set the

minutes. Press 'PROG' to change to program

OFF time. (Dia.8)

5. Use the '+' or '-' to set the OFF time in the

same way as for PROG 1 ON time.

6. Press 'PROG' to scroll through program 2 ON,

program 2 OFF, program 3 ON, program 3

OFF,

program 4 ON, program 4 OFF, adding in times

as required. If you wish to omit programmes

just leave dashes in that ON/OFF location.

Press 'PROG' to move to the next linked day

(SAT follows the 5 day group automatically)

(Dia.9).

7. Set ON/OFF times as before. Press 'PROG' to

move to the next linked day (SUN follows the

SAT automatically) (Dia.10).

8. Set ON/OFF times as before.

9. Once program 4 OFF has been set, press

'PROG' to exit program mode and

return to operating mode.

PROGRAM DUPLICATION

There are two copy functions: copy one day to another, or copy one day to all

other days. When programming for 'Individual Day' or '5 Day' you can copy

the programmed data from one day to another day.

1. When setting ON time of 'PROG' 1, press 'TIME' button and then use '+' or '-'

to select the day you want to copy.

2. Press 'TIME' button twice to copy the data of the selected day to current

day.

Or press 'TIME' button for 2 seconds to copy the data of the selected day to

the following days.

Dia.5

Dia.6

Dia.6)

Dia.7

Dia.8

Dia.9

Dia.10

(Example shown for copying data TUE to THU)

When the ON/OFF times for WED are set, the

display will show 'THU':- (Dia.11).

3. Press 'TIME' button then the icon 'MON' will

be flashing (Dia.12).

4. Use '+' or '-' button to select 'TUE', then press

'TIME' button twice to copy the data. The

display will show: (Dia.13).

MODIFYING OR ADDING NEW PROGRAMMES

1. Press 'PROG' button and hold for approx 2

seconds, the display will show: (Dia.14).

2. Use '+' or '-' button to select the day

grouping which requires modifying or a new

day grouping for a new programme.

3. For modification press 'PROG' repeatedly to

arrive at the programme time requiring

modification then use '+' or '-' button to

make the change. Press 'PROG' repeatedly

again to arrive at the next time requiring

modification and use '+' or '-' button to

make the change.

OPERATING MODE

Note: Operating mode needs to be set to allow programmed times to

function.

To set timer status:-

1. Use'+' button to set the output mode.

- Output to permanently ON and omit the program (Dia.15).

OFF

- Output to permanently OFF and omit the program (Dia.16).

ON AUTO

- Output to ON until next program OFF period (Dia.17).

OFF AUTO

- Output to OFF until next program ON period (Dia.18).

Note: When in program mode display will always show AUTO.

Dia.15

Dia.17

ONE OT TWO HOUR BOOST

1. Pressing '-' (Boost) once in normal

operating mode turns on for 1 hour period

(Dia.19).

2. Pressing '-' (Boost) twice turns output on a

for 2 hour period (Dia.20).

3. Pressing '-' (Boost) button three times

cancels the (Boost) ON period (Dia.21).

Dia.20

Dia.11

Dia.12

Dia.13

Dia.14

Dia.16

Dia.18

Dia.19

Dia.21