Major Manufacturing HIT-66-274 Talimatlar Kılavuzu - Sayfa 7

Torna Tezgahı Major Manufacturing HIT-66-274 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Major Manufacturing HIT-66-274 10 sayfaları. Template for sargent “in” series cylindrical lock

Sayfayı Yazdır

With a 2-1/8" hole

saw, drill the cross

bore hole. Drill from

both sides of the

door. When drilling,

back the hole saw

out of the cut to

remove chips.

Using a 1" auger or brad point bit,

drill the latch hole. Pull the bit out of

the hole several times when drilling

to remove a chips.

With a 3/8" twist drill,

drill the holes for the

thru bolts. Drill top

and bottom holes

half way from both

sides of the door.

Pull drill out several

times when drilling to

remove chips.

Major Manufacturing Inc

PAGE 6