Green Brook M22M Kurulum Talimatları

Aksesuarlar Green Brook M22M için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Green Brook M22M 2 sayfaları. Safetysure twin rcd socket

Sayfayı Yazdır

Installation Instructions for

SafetySure Twin RCD Socket

M22W, M22M & Switched versions

IMPORTANT

This product should be installed by a

competent person and in

accordance with the current IET

Wiring Regulations. If in doubt,

consult a qualified electrician.

Electricity is dangerous and an RCD

must not be used as a substitute for

normal precautionary measures.

Always disconnect from mains supply

before any inspection or repair to

equipment is carried out. Do not

allow children to tamper with

electrical devices.

This device will protect against live

and neutral leakage faults to earth, it

will not protect against electric shock

due to contact with both

conductors, short circuits between

live and neutral, or a fault in the

wiring supply to this device.

This a Type AC RCD.

Type AC RCD should not be ﬁtted

upstream of a Type A RCD as the

load characteristics of a Type A RCD

could then impair operation of the

Type AC RCD.

TO FIT THIS SAFETYSURE RCD SOCKET –

Switch off the power supply at the

mains in order to isolate the existing

socket. Remove the old socket, then

for the Unswitched models M22W

and M22M simply connect using the

wiring diagram below.

Green/Yellow(E)

Or for switched sockets M22SW and

M22SM follow the diagram below.

Green/Yellow(E)

If earth conductors are bare, they

must be sleeved with appropriate

green/yellow sleeving.

If you are in any doubt about

connecting this product consult a

qualified electrician.

M22SW, M22SM

Brown(L)

Blue(N)