IKEA 004.169.47 Manuel - Sayfa 7
Fırın IKEA 004.169.47 için çevrimiçi göz atın veya pdf Manuel indirin. IKEA 004.169.47 32 sayfaları.
ENGLISH
Failure to maintain the appliance in a clean condition could
•
lead to deterioration of the surface that could adversely
affect the life of the appliance and possibly result in a
hazardous situation.
Safety instructions
Installation
Warning! Only a qualified person
must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Do not pull the appliance by the handle.
• Install the appliance in a safe and suitable
place that meets installation
requirements.
• Keep the minimum distance from other
appliances and units.
• Before mounting the appliance, check if
the oven door opens without restraint.
Cabinet minimum
height (Cabinet under
the worktop mini‐
mum height)
Cabinet width
Cabinet depth
Height of the front of
the appliance
Height of the back of
the appliance
Width of the front of
the appliance
Width of the back of
the appliance
444 (460) mm
560 mm
550 (550) mm
455 mm
440 mm
595 mm
559 mm
Depth of the appli‐
ance
Built in depth of the
appliance
Depth with open door
Ventilation opening
minimum size. Open‐
ing placed on the bot‐
tom rear side
Mains supply cable
length. Cable is
placed in the right
corner of the back
side
Mounting screws
Electrical connection
Warning! Risk of fire and electric
shock.
• All electrical connections should be made
by a qualified electrician.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the mains cable need to be
7
567 mm
546 mm
882 mm
560x20 mm
1500 mm
3.5x25 mm