DECKED DS2 Kurulum Talimatları Kılavuzu - Sayfa 3
Otomobil Aksesuarları DECKED DS2 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. DECKED DS2 13 sayfaları. For ford super duty 6'9” bed length 1999-2016
Sayfayı Yazdır
▼ HEY! TORQUE BOY: READ BEFORE YOU INSTALL DECKED ▼
1. DON'T go rogue on us, please read the instructions.
2. DON'T over tighten bolts, get em' hand-tight.
3. DON'T use power tools.
4. If you don't follow directions and do use power tools:
1). Set clutch at a very low setting. 2). If you blow it, see NOTE.*
NOTE* Two extra threaded inserts are included in BAG PREP-EXTRA. That's all you get, unless you call us and ask for
more. The inserts will replace any stripped inserts in the tailgate ammo cans or front face of the center vert at
the bottle opener, but NOT THE TOP OF THE CENTER VERT, so hand tighten until snug only! You can also screw the
inserts back in if dislocated. There is a straight screwdriver slot on the underside of the threaded insert.
TAILGATE ammo cans have wide bottoms; CABSIDE ammo cans have narrow bottoms.
NOTE: You will need a buddy to help with exactly two steps.
watch our detailed installation video or give us a call. We're happy to help!
AMMO CAN DRAIN HOLES
• Do you use a tonneau or shell over your DECKED system?
There is no need to drill holes, unless you leave your tonneau open in a deluge.
• Does your DECKED system live outside?
The ammo cans will get water in them. You'll need to drill holes in the ammo cans.
There are two dimples in the bottom of each ammo can. Drill a 1/2" hole at each dimple. A smaller hole
will get clogged.
DECKED.COM | #DECKEDUSA | @DECKEDUSA
Prevent embarrassing, expletive-filled language,
208.806.0251 | DECKED.COM/INSTALLVIDEO
(TO DRILL OR NOT TO DRILL.)
5. Start all bolts with fingers to avoid cross-threading.
6. DON'T over tighten J-hooks during installation.
Just get 'em good and snug; enough to keep the
system from moving in the bed.
7. Nice job if you're still reading .
DS1/DS2 | v.8 | Page 3