IKEA 304.118.54 Manuel - Sayfa 25
Fırın IKEA 304.118.54 için çevrimiçi göz atın veya pdf Manuel indirin. IKEA 304.118.54 36 sayfaları.
Sayfayı Yazdır
ENGLISH
2. Lift and turn the levers fully on both
hinges.
3. Close the oven door halfway to the first
opening position. Then lift and pull
forward and remove the door from its
seat.
4. Put the door on a soft cloth on a stable
surface.
5. Hold the door trim (B) on the top edge of
the door at the two sides and push
inwards to release the clip seal.
2
B
6. Pull the door trim to the front to remove
it.
7. Hold the door glass panels by their top
edge and carefully pull them out one by
1
one. Start from the top panel. Make sure
the glass slides out of the supports
completely.
8. Clean the glass panels with water and
soap. Dry the glass panels carefully. Do
not clean the glass panels in the
dishwasher.
When the cleaning is completed, install the
glass panels, the door trim and the oven
door, close the levers on the both hinges.
Make sure that you put the glass panels (A
and B) back in the correct sequence. Check
for the symbol / printing on the side of the
glass panel, each of the glass panels looks
different to make the disassembly and
assembly easier.
The screen-printing zone must face the inner
side of the door. Make sure that after the
installation the surface of the glass panel
frame on the screen-printing zones is not
rough when you touch it.
When installed correctly the door trim clicks.
25