Airflow Duplexvent Flexi DV 2600 Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 6
Fan Airflow Duplexvent Flexi DV 2600 için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. Airflow Duplexvent Flexi DV 2600 18 sayfaları. Ventilation units with
heat recovery
Ayrıca Airflow Duplexvent Flexi DV 2600 için: Kurulum, Kullanım ve Bakım Kılavuzu (19 sayfalar)
Sayfayı Yazdır
5.4 Installation steps
●
Before installation remove the wooden transport planks.
●
The versatile design of DUPLEXVENT FLEXI DV1600 and DV2600 allows mounting the unit under the window or in the ceiling.
Window position:
-
The appliance is placed on height-adjustable feet (H
-
Due to the condensate drain the appliance must be tilted towards section i2 (EHA).
Ceiling position:
-
The appliance is suspended from anchors of sufficient load bearing capacity (provided by the building contractor) using four
suspension eyes (included in delivery) with Ø 11 mm holes.
-
Due to the condensate drain the appliance must be tilted towards section i2 (EHA), see the picture.
5.5 Adjusting the unit - turning ports e2 (SUP) / i2 (EHA)
●
Only units up to DV1600 can be adjusted in this way.
●
When making the adjustment, follow the diagram below and the visual instructions in the appendix.
5.6 Connecting the condensate drain pipe
●
The unit is versatile and has 4 condensate outlets in total for two directions of air flow and two installation positions. A specific
condensate outlet is always used for a specific application.
-
For the window position use the condensate outlet in section i1 (ETA)
- For the ceiling position use the condensate outlet in section i2 (EHA)
= 147 mm) included in delivery.
min
6