Major Science MP-250V Kullanım Kılavuzu - Sayfa 13

Güç Kaynağı Major Science MP-250V için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Major Science MP-250V 20 sayfaları.

Operation Instructions

1. Place MS 250V / MS 300V Power Supply series on a sturdy and level

surface in a safe, dry place, away from laboratory traffic.

2. Ensure that the AC power switch is OFF, and then plug the three-pronged

power cord into a grounded three-prong AC outlet of the appropriate voltage

(110V to 240V as indicated on the rating sticker near the AC cord on the

back of the unit).

3. Turn the AC power ON by the switch on the rear.

4. Connect the DC output jacks from the electrophoresis unit; insert the red

lead (+) into the red output jack, and the black lead (-) into the black output

jack.

5. Press

Key, and then press

suitable voltage.

6. Press

Key, and then press

suitable current, alternatively.

7. Press

Key, and then press

minute format upon your request if setting time is required. It will auto stop

while timer is up (count down).

Note: When timer is set as "0", it means continuous operation.

8. Press

Key to start the run.

9. After pressing

LED is flashing. Alternatively, if it is Constant Current,

Key to start the run, if it is Constant Voltage,

Key or

Key to select the

Key or

Key to select the

Key or

Key to adjust timer in

, the LED is lit.

, the

, the LED is