Major tech MT350 Kullanım Kılavuzu - Sayfa 4
Ölçüm Cihazları Major tech MT350 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Major tech MT350 8 sayfaları. Loop impedance & psc tester
Sayfayı Yazdır
3.2. Loop test
Turn the tester to 20, 200 or 2000Ω range. Push the test button, LCD will
display the value and unit, the tester will beep once after the test is over.
To get better value turn the tester to lower range as possible. If LCD flash
" " , disconnect the tester and power and make the tester cool down.
3.3. Prospective short current test
Turn the tester to 200A, 2000A or 20kA range. Push the test button, LCD
will display the value and unit, the tester will beep once after the test is
over.
To get better value set the tester to lower range as possible. If LCD flash
" " , disconnect the tester and power and make the tester cool down.
4. FEATURES
Function
Lines test
Over heat protect
Overload protect
Low Battery Indication The flag " " is displayed when the battery
Test mode
Operating Temperature 0°C to 40°C (32°F to 104°F) and Humidity
Storage Temperature
Power source
Dimensions
Weight
4
Range
3 LED indicates lines state. When reversed, the
third LED lights up.
When the temperature of the resister is high,
the tester will cut and lock. LCD will display
"Temperature is High" and flash the flag " "
When the volt of P-E is up to 250V, the tester
will stop test to protect the tester and LCD will
flash "250V"
voltage drop below the operating voltage.
When you press the key "test", tester will
display the result for 5's then display the
voltage.
below 80% RH
-10°C to 60°C (14°F to 140°F) and Humidity
below 70% RH
6 x AA batteries
200(L) x 92(W) x 50(H) mm
Approx 700g including battery .