Deckma Hamburg FMS3000 Kurulum Talimatları Kılavuzu - Sayfa 5

Güvenlik Sistemi Deckma Hamburg FMS3000 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Deckma Hamburg FMS3000 13 sayfaları. Fire alarm system

Sayfayı Yazdır
Technical documentation
2.

Fire detectors

2.1.

Sensor and base

Certain fire detectors always consist of a base and a sensor. The conventional sensors SLR-E3, FJ-
AE3, DFJ-CE3, DCD-AE3 and DCD-CE3 can all be mounted on the standard base (YBN-R/6). Follow
the guideline given below to install and maintain the FMS.
In case these instructions are ignored, correct functioning cannot be guaranteed!
Warning:
The CDX range of sensors cannot be used to prevent fires, but are rather only intended to detect a
certain characteristic of a fire.
The sensors DCD-AE3 and DCD-CE3 are used to detect changes of temperature and cannot detect
smoke or other phenomena. When installing sensors, check that the location of each individual sensor
complies with the applicable regulations and recommendations.
2.2.

Connection of different fire detector types

Each fire loop module (FM) has eight conventional loops. After installation, all connections are to be
secured with screws to prevent them coming loose due to vibration. The drawing shows a connection
plan of various conventional sensor and base types to a fire loop module (FM).
Tel.: +49 (0)4105 / 65 60 – 0 *
Installation Instructions
DECKMA GmbH
Email:
201309IA
* Fax: +49 (0)4105 / 65 60 – 25
www.deckma-gmbh.de
* Internet:
Version 0.2
27/09/2016
FMS3000
page 5 of 13