Major tech MT767 Kullanım Kılavuzu - Sayfa 8
Ölçüm Cihazları Major tech MT767 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Major tech MT767 12 sayfaları. 600a ac/dc clamp meter with ir thermometer
Sayfayı Yazdır4.11. General Specifications (continued)
Overrange Indication
Measurements Rate
Input Impedance
Display
AC Current
AC Voltage bandwidth
Bluetooth Connection
Operating Temperature 5 to 40°C (41 to 104°F)
Storage Temperature
Operating Humidity
Storage Humidity
Operating Altitude
Over voltage
Battery
Auto OFF
Safety
5. OPERATION
NOTES: Read and understand all Warning and Caution statements in
this operation manual prior to using this meter. Set the function select
switch to the OFF position when the meter is not in use.
5.1. AC/DC Current Measurements
WARNING: Ensure that the test leads are disconnected from the meter
before making current clamp measurements.
1. Set the Function switch to the 600A AC/DC,
60A AC/DC range.
2. Press MODE to switch the AC/DC measurement.
3. If the range of the measured is not known,
select the higher range first then move to the
lower range if necessary.
4. Press the trigger to open jaw. Fully enclose one
conductor to be measured. The clamp meter
LCD will display the reading.
8
"OL" is displayed
2 per second, nominal
≥10MΩ (VDC and VAC)
6000 counts LCD
50-60Hz (AAC)
50-1000Hz (VAC)
Connection through mobile device
-20 to 60°C (-4 to 140°F)
Max 80% up to 31°C (87°F) decreasing linearly
to 50% at 40°C (104°F)
<80%
2000 meters (7000ft.) maximum.
Category III 1000V, Category IV 600V.
3x "AAA" 1.5V Battery
approx. 15 minutes
For indoor use and in accordance with Over
voltage Category II, Pollution Degree 2.
Category II includes local level, appliance,
portable equipment, etc., with transient over
voltages less than Over voltage Cat. III