KitchenAid KCGS950ESS00 Kullanıcı Kılavuzu - Sayfa 7
Setüstü Ocak KitchenAid KCGS950ESS00 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. KitchenAid KCGS950ESS00 17 sayfaları.
Sayfayı Yazdır
Burners w ill
If thisisthefirst t ime thecoo_op i s being used, turn onanY 0he oftheburnei knobs t orelease airfrom thegaslines:
notoperate
Besure thecontrol knob ispushed inbefore t urning t oa setting,
A burner port ( hole) maybe c logged o rtheigniter may need cleaning, Refer to Cleaning theBurners: TiPSnthe Key Usage
Tipssection:
Check t hat t heburner base and caps are positioned correctly. Refer to Placement
ofBurner Heads a nd Capsinthe Key
UsageTips,!
section.
Burner f lames Compare the flame totheillustrations
below. Iftheflames l ook like A,call f or
areuneven,
service. Normal flames l ook likeBorC.IfLP(propane) gasisbeing used, the
yellow and/or cooktop may have been converted improperly.
Contact a service technician or
Yellow Flames YelmowTips
on
Soft Blue
noisy
refer t othe"Assistance
orService" section i ntheUse andCare Guide.
ca//for service
outer cones
Flames
Normal for LP Gas
Nonna! for
Natural Gas
A burner port (hole) may be clogged. Refer to "Cleaning the Burners: Tips" in
the "Key Usage Tips" section.
Check to be sure the burner caps are positioned correctly. Refer to "Placement
of Burner Heads and Caps" in the "Key Usage Tips" section.
When aknob
sparking/clicking
Of ai! the burners is no rmal operation. A burner wil! !ight 0nly if the knob is pushed in and turned to the_
is pushed,
all position,
burners spark
Burner is
If the burner is wet or dirty, clean and/or let the burner dry.
making a
popping
noise
Excessive
Be sure the cookware is approximately the same size as the cooking area and surface burner.
heat around
Cookware should not extend more than 1/2" 13 mm outside the cookin
area
(
)
g
•
the cool{ware
Adjust
the f!ame s0 that it does not wrap around the c00kware,
on cooktop
Cooking
results are not
what expected
Check the following:
•
Be sure the proper cookware is being used. Refer to the "Cooking with Your Cooktop" section.
•
Check the heat level. Refer to "Excessive heat around the cookware on cooktop."
•
Check the level of the cooktop. Refer to the Installation Instructions.
Flame too
High or too
Low
Ensure the cooktop gas supply is correct (LP or Natural gas). These cooktops come from the factory set for Natural gas.
Refer to the Installation Instructions to verify that the pressure regulator is installed correctly and the line pressure and the gas
line pressure is correct.