KitchenAid KCGS956ESS00 Kullanıcı Kılavuzu - Sayfa 3
Setüstü Ocak KitchenAid KCGS956ESS00 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. KitchenAid KCGS956ESS00 17 sayfaları.
Sayfayı Yazdır
Assembling
the Burners
Check your model number. Then refer to the following for information specific to your burners.
A
B
C
A
B
C
A
B
C
E
E
E
KCGS350ESS
and KCGS356ESS
A. Standard burner
B. Dual flame burner
C. Standard burner
(Even-Heat
TM
simmer)
D. Standard burner
E. Standard burner
KCGS550ESS
and KCGS556ESS
A. Standard burner
(Even-Heat
TM
simmer)
B. Dual tier ultra burner
C. Standard burner
D. Standard burner
E. Standard burner
KCGS950ESS
and KCGS956ESS
A. Standard burner
(Even-Heat
TM
simmer)
B. Dual tier ultra burner
C. Standard burner
D. Even-Heat
TM
torch burner
E. Standard burner
Standard
and Dual Flame Burners
•
Burner caps and spreaders are included with your cooktop.
Always match the burner spreader size to the cap size.
Always line up the hole in the spreader to the electrode.
The cooktop comes with an extra Melt cap. This is a large cap with
"MELT" and "FOR SMALLEST BURNER" printed on it. Use this cap
over the small burners, position C on KGCS3 series models and
position A on KCGS5 series and KCGS9 series models
Standard and dual flame burners are similar in assembly. Note that
there is no hole in the dual flame burner spreader to insert the
electrode. The stacked burner electrode (C) aligns with the
semicircle notch in the spreader (B).
C
B
Standard Burner
Dual Flame Burner
A. Cap
A. Cap
B. Spreader
B. Spreader
C. Electrode
C. Electrode
Install the outer spreader, inner spreader, and inner cap on the
Even-Heat
TM
burner.
IMPORTANT: Align the notches in the inner spreader with the tabs
on the Even-Heat
TM
burner.
A
B
C
Even-Heat
TM
Burner
Inner Spreader
A. Inner cap
A. Inner spreader
B. Inner spreader
notch
C. Outer spreader
B. Burner tabs
The cooktop comes with 2 small burner caps, one for the dual tier
ultra burner and one for the Even-Heat
TM
torch burner. Note the
differences in the small burner caps:
- the small dual tier ultra burner cap is thin and hollow.
- the small Even-Heat
TM
torch burner cap is thick and solid.
Dual Tier Ultra and Even-Heat
TM
Torch Burners
•
Install the outer and inner caps on the dual tier ultra burner.
A ............
B
g
==_
A. Small dual tier ultra burner cap
(center burner)
B. Small Even-Heat
TM
torch
burner cap (right front burner)
Dual Tier Ultra Burner
A. Inner cap
B. Outer cap