Major tech MT950 Kullanım Kılavuzu - Sayfa 3

Ölçüm Cihazları Major tech MT950 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Major tech MT950 4 sayfaları. Non-contact tachometer

Dimension

Weight

Measuring Manual

Apply a reflective mark to the object being measured. Hold down the MEAS

button and align the visible light beam with the applied target. Verify that

monitor indicator lights when the target aligns with the beam. The meter turns

on with the previously used mode. If you need to change the mode, release the

MEAS button and press the MODE button to change between RPM and REV.

Hold down MEAS to activate the new mode. The instrument auto powers off in

10 sec after releasing the MEAS button. Press the MEM button to recall the

last measurement readings for the Max, Min and Last value.

Measuring Considerations

Reflective Mark

• Cut the adhesive tap provide into approx. 12mm (0.5") squares and

apply one square to each rotation shaft.

• The non-reflective area must always be greater than the reflective area.

• If the shaft is normally reflective, it must be covered with black tape or

black paint before attaching reflective tape

• Shaft surface must be clean and smooth before applying reflective tape.

Very Low RPM Measurement

• As it is easy to get high resolution and fast sampling time, if measuring

the very low RPM values, suggest user to attach more "REFLECTIVE

MARKS" averagely. Then divide the reading shown by the number of

"REFLECTIVE MARKS" averagely. Then divide the reading shown by the

number of "REFLECTIVE MARKS" to get the real RPM

160 x 58 x 39mm

151g