Centurion SDO-10 Kurulum Talimatları ve Kullanım Kılavuzu - Sayfa 18

Garaj Kapısı Açıcı Centurion SDO-10 için çevrimiçi göz atın veya pdf Kurulum Talimatları ve Kullanım Kılavuzu indirin. Centurion SDO-10 19 sayfaları. Sectional and tilting door opener

Sayfayı Yazdır

Centurion SDO-10 Kurulum Talimatları ve Kullanım Kılavuzu

Symptom

• AGDO will not function at all

• Door stops before reaching

fully open position

• Door stops & reverses before

reaching fully closed position

• Door stops before reaching

fully closed position

• Door will not Safety Reverse

• Door requires excessive force

to Safety Reverse

• Door requires excessive force

to Safety Stop

• AGDO will not function from

Hand Transmitter

• Hand Transmitter operating

range is poor

• Courtesy Lamp will not

function

• Cannot adjust Safety

Obstruction Force settings

• LED Indicator glows solid

• LED Indicator slow flashes

• LED Indicator has extinguished

• Door will not Auto Close

• Will not Safety Reverse when

Safety Beams are interrupted

• Door is noisy

• AGDO is noisy

TROUBLE SHOOTING GUIDE

Suggested Remedies

• Check that AGDO is connected to power supply

• Check power point function by plugging-in an alternate appliance

• Check that AGDO is engaged to door

• Disengage AGDO from door and check for obstructions

• Disengage AGDO from door and check for correct spring balance

• Check for correct Safety Obstruction Force settings (open direction)

• Check for correct open direction travel adjustment

• Disengage AGDO from door and check for obstructions

• Disengage AGDO from door and check for correct spring balance

• Check for correct Safety Obstruction Force settings (close direction)

• Check for correct Safety Beam alignment

• Check for correct close direction travel adjustment

• Contact serviceman

• Check for correct Safety Obstruction Force settings (close direction)

• Check for correct Safety Obstruction Force settings (open direction)

• Check function of AGDO by operating from "Run" button

• Check function of AGDO by learning-in a substitute Hand Transmitter

• Re learn Hand Transmitter code into AGDO

• Replace Hand Transmitter battery

• Extended AGDO antenna

• Replace Courtesy Lamp bulb

• Ensure that Safety Obstruction Force Adjustment Mode has been entered

• AGDO has reached fully closed position

• AGDO has reached fully open position

• AGDO is traveling between limits

• Check for Safety Beam damage

• Check for correct Safety Beam alignment

• Check that Dip 1 & 2 have been selected to the "ON" position

• Check that connecting wires have not come loose from Safety Beams

• Check that connecting wires have not come loose AGDO terminals

• Check that Dip 1 has been selected to the "ON" position

• Lubricate door springs with automotive wheel bearing grease

• Lubricate pivot point of door hinges with WD40

• Check for loose Courtesy Lamp cover is not loose

• Check that main cover is not loose

• Check that chain is correctly tensioned

- 18 -

Reference

Page

Item

SDOPD