Major tech MT1887 Kullanıcı Kılavuzu - Sayfa 8
Multimetre Major tech MT1887 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Major tech MT1887 17 sayfaları. True rms industrial multimeter
Sayfayı Yazdır
TEMPERATURE MEASUREMENTS
1.
Set the function switch to the
2.
Insert the Temperature Probe into
to observe the correct polarity.
3.
Press the MODE button to
4.
Touch the Temperature Probe
temperature you wish to measure.
part under test until the reading
5.
Read the temperature in the display.
Note: The temperature probe is fitted with a type K mini connector.
A mini connector to banana connector adaptor is supplied for
connection to the input banana jacks.
CAPACITANCE MEASUREMENTS
WARNING: To avoid electric shock, disconnect power to the unit under test and discharge all
capacitors before taking any capacitance measurements. Remove the batteries and unplug
the line cords.
1.
Set the rotary function switch to the
2.
Insert the black test lead banana
jack.
plug into the positive V jack.
3.
Press the MODE button to indicate
4.
Touch the test leads to the
5.
Read the capacitance value in the
FREQUENCY (DUTY CYCLE) MEASUREMENTS (ELECTRONIC)
1.
Set the rotary function switch to the
2.
Insert the black lead banana plug into
test lead banana plug into the positive Hz
3.
Touch the test probe tips to the circuit
4.
Read the frequency on the display.
5.
Press the MODE button to indicate
6.
Read the % duty cycle in the display.
green Temp position.
the input jacks, making sure
indicate "ºF" or "ºC"
head to the part whose
Keep the probe touching the
stabilizes (about 30 seconds).
green Ω CAP
plug into the negative COM
Insert the red test lead banana
"F"
capacitor to be tested.
display
green Hz/% position.
the negative COM jack and the red
jack.
under test.
"%".
position.