Major tech MT25 Kullanım Kılavuzu - Sayfa 10

Multimetre Major tech MT25 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Major tech MT25 16 sayfaları. 600v ac/dc multimeter

Sayfayı Yazdır

5.12. Continuity

! WARNING:

Never test continuity on a live circuit.

1. Set the rotary function switch to the Ω

2. Press the MODE button until the "

appears on the LCD display.

3. Insert the black test lead into the COM input jack and

the red test lead into the Ω input jack.

4. Touch the test lead probes to the device or wire under

test.

5. A beeper will sound if the resistance is approximately

40Ω or less and the resistance value will be shown on

the LCD display.

5.13. Capacitance Measurements

! WARNING:

Safety discharge capacitors before taking capacitance

measurements.

1. Set the rotary function switch to the Ω

2. Press the

MODE

appears on the LCD display.

3. Insert the black test lead into the

and the red test lead into the

4. Touch the test lead probes to the capacitor under

test.

5. Read the capacitance value on the LCD display. It

may take up to a minute to get a stable reading on

large capacitors.

5.14. Temperature Measurements

! WARNING:

Do not touch temperature probe to live circuit.

1. Set the rotary function switch to the

2. Press the

MODE

3. Connect the Temperature Probe to the Banana Plug

Adapter. Note the

Connect the adapter to the meter, making sure the –

side goes into the

into the

°F °C

input jack.

4. Touch the tip of the Temperature Probe to the object

being measured. Keep the probe touching the object

until the reading stabilizes (about 30 sec).

5. Read the temperature on the LCD display.

" symbol

button until the "

" symbol

COM

input jack

input jack.

°F °C

button to select readings in

–

and

markings on the adapter.

COM

input jack and the

position.

°F

°C

side goes