Gammex 403 LE Kullanıcı Kılavuzu - Sayfa 5
Test Ekipmanları Gammex 403 LE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gammex 403 LE 20 sayfaları. Precision multi-purpose phantoms
Sayfayı YazdırScanning the 403 LE
•
Always place the phantom on a stable, level surface for scanning.
•
The phantom comes ready to scan. Do not peel off surface material.
•
Use water or a generous amount of coupling gel to ensure good transmission. Do
not use mineral oil, baby oil or lanolin-based gels as a coupling medium. Poor
transmission is a result of insufficient coupling.
•
Do not press the transducer into the scanning surface. This damages the
scanning surface and will shorten the life of the phantom. For curved
transducers, use water or a thick layer of gel.
•
Clean the scanning surface immediately after use. Use a soft cloth or paper towel
and soap and water, if needed.
Caution:
Do not press the tranducer
into the scanning surface.
5