Jalousie-Welt Jupiter İşletme ve Bakım, Sevkiyat Talimatları, Ambalajdan Çıkarma ve Kurulum - Sayfa 15

Aksesuarlar Jalousie-Welt Jupiter için çevrimiçi göz atın veya pdf İşletme ve Bakım, Sevkiyat Talimatları, Ambalajdan Çıkarma ve Kurulum indirin. Jalousie-Welt Jupiter 20 sayfaları. Terrace awning

Sayfayı Yazdır

Person "2" ‒ if desired pitch angle is achieved,

tighten the screw "B".

After changing the pitch angle of the arms,the front profile requires the setting. Description of the

system below.

3.8.6. Front profile adjust

Measure the length of the visible part of the

screw "C " in the arm bracket.

Set the front profile according to table below:

Slit E

1 (upper)

10,11

to set in accordance with the table above.

Note

In order to prevent an accumulation of water from the rain in the fabric (a water bag

forming), it is necessary to set by fully opened awning a pitch angel on more than 14 °.

Through the formation a water bag can cause damage to equipment and danger to

people. Awning is a product that is designed to protect against the sun. You can only

use it in light rain.

Note

If the pitch angle of the awning arms has changed must be readjust. Inappropriate

front profile settings can lead to structural damage or injuries.

Screw „C" unscrew to:

3,7 ‒ 3,39 cm

3,39 ‒ 3,08 cm

3,08 ‒ 2,77 cm

2,77 ‒ 2,46 cm

2,46 ‒ 2,14 cm

2,14 ‒ 1,83 cm

1,83 ‒ 1,52 cm

1,52 ‒ 1,21 cm

1,21 cm ‒ 0,9 cm

not used

page: 15 / 20

Screw „C" on max

3,7 cm unscrew

E (slit)

F (cog)

G (clamping screw)