Airflow LA BRISA Kullanıcı El Kitabı - Sayfa 4

Fan Airflow LA BRISA için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Airflow LA BRISA 12 sayfaları. Fans

Unpacking: Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them

against the parts listed here. Before discarding packaging material, be certain that all parts have been removed.

Unpacking

Before assembling and installing your ceiling fan, remove all

parts from the shipping cartons and check them against the

parts listed here. Before discarding packaging material, be

certain that all parts have been removed.

Be sure to only use genuine Airflow blades. The blade shrink

wrap holds 5 blades of matched weight. If more than one fan

is being installed, be sure not to mix blade sets.

TIP: The packing styrofoam makes a handy work bench.

Remove the bottom foam from the box.

Step 1. Hold the switch housing close to the fan and

connect the motor plug to the switch housing socket.

The connectors are keyed to ensure correct alignment

during installation - Do not force!

Step 2. Remove the three mounting screws from the

switch housing plate ready for the next step.

PREPARATION INSTRUCTIONS

NOTE: Only one set of blade holders is supplied. Depending on

the fans and series, there are 3 different mounting proceedures.

CAUTION: When removing the shrink wrap,

be careful not to scratch the blades.

SWITCH

HOUSING

MOUNTING

SCREW

(3)

MOTOR

CONNECTOR

(PLUG)

SWITCH

HOUSING

CONNECTOR

(SOCKET)

SWITCH

HOUSING

PLATE