Airflow MaxAir 7105A Kurulum Talimatları - Sayfa 2

Fan Airflow MaxAir 7105A için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Airflow MaxAir 7105A 4 sayfaları. Window exhaust fan

7105A Auto Switched & 7107A Pull-Cord Switched

Using template, cut hole in glass ø230 ± 2mm.

Slide internal clamp over your arm as shown.

Fold external clamp and insert through the hole

in the window pane.

Internal

clamp

Make sure the seal of external clamp is against

the glass, then align and insert the bolts through

internal clamp. Brass nuts supplied should then

be connected to bolts and finger tightened only.

Finger

tighten

only

If required, apply liquid or similar soap to foam

seal on inside of external clamp. Carefully

slide cylindrical window grille outlet end of

fan assembly through opening. With screws

provided, attach fan assembly to window clamp

assembly (4 places).

MaxAir Window Exhaust Fan Installation Instructions

External

clamp

Remove termination cover, see Fig. A. (Screws

marked with 1, 2, 3.)

Fig. A

Screws

marked 1,

2, 3, retain

the terminal

cover to the

chassis.

Cable (3 core flex) to be placed as shown in

Fig. B. Electrician to make electrical connections

(3 core 1mm

shown in Fig. C. Stripped ends to be kept to a

minimum. Replace termination cover.

Fig. B

Apply soap to

the foam seal

flex, Ø7mm [17/64"] specified) as

Break tab for

cable access

Fan

assembly