2KRC P002 Montaj Kılavuzu - Sayfa 5

Oyuncak 2KRC P002 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. 2KRC P002 17 sayfaları. Hyper ep. fun scale racer

Install the servo horn and on the Elevator then turn on

the Radio to neutral the Elevator Servo.

Drill a 1.9mm hole for the control wire adjuster 8mm

from the center of the servo horn as show.

Install the control wire adjuster and mount the

Elevator Servo on the servo tray as show.

Notice: you must neutral the servo before them install

inside the Fuse.

Turn the servo tray around 90degree and push them

install the fuse. Then turn them right side up again.

Fix the servo tray with a TP screw that supply with

this kit.