IKEA FORKYLD Kurulum Talimatları Kılavuzu - Sayfa 8

Buzdolabı IKEA FORKYLD için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. IKEA FORKYLD 24 sayfaları. Integrated fridge/freezer
Ayrıca IKEA FORKYLD için: Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Kullanıcı Kılavuzu (40 sayfalar), Manuel (24 sayfalar), Manuel (44 sayfalar), Manuel (44 sayfalar), Hızlı Başlangıç Kılavuzu (16 sayfalar), Manuel (25 sayfalar), Manuel (32 sayfalar)

Sayfayı Yazdır

IKEA FORKYLD Kurulum Talimatları Kılavuzu

1. Installation

ENGLISH

Climate

Ambient temperature

class

+16°C to + 43°C

Some functional problems might

occur for some types of models

when operating outside of that

range. The correct operation can

only be guaranteed within the

specified temperature range. If

you have any doubts regarding

where to install the appliance,

please turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

Electrical Connection

Caution! Any electrical work

required to install this appliance

should be carried out by a

qualified electrician or

competent person.

Warning! This appliance must be

earthed.

The manufacturer declines any

liability should these safety

measures not be observed.

The wires in the mains lead are coloured in

accordance with the following code:

• A - green and yellow: Earth

• C - brown: Live

• D - blue: Neutral

As the colours of the wires in the mains lead

of this appliance may not correspond with

the coloured markings identifying the

terminals in your plug, proceed as follows:

1. Connect the wire coloured green and

yellow to the terminal marked either

with the letter "E" or by the earth symbol

or coloured green and yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter

"N" or coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or

coloured red.

4. Check that no cut, or stray strands of

wire is present and the cord clamp (E) is

secure over the outer sheath.

Make sure the electricity supply voltage

is the same as that indicated on the

appliance rating plate.

5. Switch on the appliance.