DecoBREEZE DBH5424 Kullanım Kılavuzu - Sayfa 3

Bilgisayar Donanımı DecoBREEZE DBH5424 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DecoBREEZE DBH5424 4 sayfaları. Indoor dual heating & cooling fan pet

Sayfayı Yazdır

FEATURES - OPERATIONS

TECHNICAL SPECIFICATIONS

• Amps: 12.5

• Wattage: 1500W (+5% –10%)

• Working voltage: 120V AC/60Hz

OPERATING INSTRUCTIONS

1. Carefully remove your heater from the box. (Please

save the carton for off-season storage.)

2. Make sure the unit is in the OFF (0) position before

plugging the heater into the outlet.

3. Place heater on firm level surface.

4. Avoid overloading your circuit by not using other high

wattage appliances in the same outlet. At 1500

Watts, this unit draws 12.5 Amps.

Mode Control

Turn the Mode Control to the desired setting:

0 - Off Mode

If you want to shut off the heater at any time of

operation, turn the Mode Control to O position. Power

indicator light will remain lit at all times indicating the

heater is plugged in.

FAN only Setting:

Turn the Mode Control to

fan only operation without heat output.

HEAT Settings

To select heat settings, turn the Mode Control to 1 or 2

and there are 2 heat settings:

1 - Low Heat

The heater will run continuously at 750W.

2 - High Heat

The heater will run continuously at 1500W.

CONTROL PANEL

Figure 1

, the heater will run at

CLEANING / MAINTENANCE

TROUBLESHOOTING

CLEANING/MAINTENANCE

During Season Care:

1. Always unplug the heater before cleaning.

2. Clean the unit with a soft cloth moistened with a mild

soap solution.

3. NEVER use abrasive or flammable solvents to clean the unit.

4. After cleaning, be sure to completely dry the unit

with a cloth or towel.

AUTO SAFETY SHUT-OFF

This heater is equipped with a technologically-advanced

safety system that requires the user to reset the heater if

there is a potential overheat situation. When a potential

overheat temperature is reached, the system will

automatically shut the heater off. It can only resume

operation when the user resets the unit.

RESET INSTRUCTIONS

If your heater shuts down:

1) Turn Control to OFF.

2) Unplug the unit and wait 30 minutes.

3) Plug in and operate normally.

TROUBLESHOOTING

If your heater fails to operate:

• UNPLUG THE UNIT and make sure the heater is

placed in an upright position.

• Make sure the electrical outlet or circuit breaker is

working.

• Check for obstructions. If you find an obstruction turn

the heater Off, and unplug the unit. Carefully remove

the obstruction and follow the reset instructions.

•

Make sure Mode Control is on Low or High setting.

•

If the heater will not operate, see specific

instructions on Auto Safety Shut-off.

Please DO NOT attempt to open or repair the

heater.

HEATER STORAGE

1. Store heater unit with cord in a cool, dry location.

2. We recommend storing the unit and cord in the

original package.